Product Description
Need an adaptor for a tap that isn't compatible with the standard benchtop adaptor kit?
The Specialty Tap Adaptor Kit includes additional fittings designed to connect Pure Water Systems benchtop water filter systems to a wider range of Australian tapware.
While most installations can be completed using the standard adaptor kit supplied with your system, some taps require a different thread size or connection type. This TA-KIT-02 provides adaptor options for these less common tap configurations.
Features
- Genuine Pure Water Systems replacement part
- Includes specialty adaptor types TA-04 to TA-07
- Suitable for selected internal thread tap configurations
- Compatible with Pure Water Systems benchtop water filter systems
- Quick and easy installation
- Ideal when the standard adaptor kit is not suitable
What's Included
TA-KIT-02 contains the following adaptor types:
- TA-04 - Thread (Male) Thread 21mm & Thread (Female) 17mm
- TA-05 – Male Thread 22mm
- TA-06 – Male Thread 18mm
-
TA-07 – Male Thread 20mm
Compatibility
TA-KIT-02 is designed for taps requiring adaptor types TA-04, TA-06 or TA-07.
If your tap is compatible with adaptor types TA-01, TA-02, or TA-03, you'll require TA-KIT-01, the standard adaptor kit supplied with new Pure Water Systems benchtop systems.
If your tap requires adaptor types TA-08, TA-09 or TA-10, you'll require TA-KIT-03.
Which Adaptor Kit Do I Need?
- TA-01 – Male Thread 24mm
- TA-02 – Expandable Internal Plug 12.5mm to 20mm
- TA-03 – Universal Rubber Cup & Clamp 15mm / 21mm
TA-KIT-02 (Internal Thread Taps)
- TA-04 – Male Thread 21mm / Female Thread 17mm
- TA-05 – Male Thread 22mm
- TA-06 – Male Thread 18mm
- TA-07 – Male Thread 20mm
TA-KIT-03 (External Thread Taps)
- TA-08 – Female Thread 18mm
- TA-09 – Female Thread 20mm
- TA-10 – Female Thread 16mm
Need Help Identifying Your Tap?
Step 1: Identify if Your Tap Has an Aerator
Check your tap type and remove the aerator if required. This will help you identify the thread and adaptor needed.
https://purewatersystems.com.au/pages/diy-install-your-filter#installation-journey
Step 2: Identify Your Tap Thread
Determine whether your tap thread is internal (female) or external (male).
https://purewatersystems.com.au/pages/diy-install-your-filter#section-anchor-step3
Step 3: Identify the Adaptor You Need
Measure your tap thread and match it to the correct adaptor using our fitting guide.
https://purewatersystems.com.au/pages/diy-install-your-filter#section-anchor-step3
Still Not Sure?
Email a photo of your tap to info@purewatersystems.com.au and our team will help identify the correct adaptor before you order.